Schedule Icons

<< Click to Display Table of Contents >>

Schedule Icons

The following sections provide information on Schedule Icons:

Schedule Triggers

Auto Report Status

Schedule Triggers

The following table provides information on the schedule triggers and settings for Auto Reports and Scan Profiles.

Trigger

Icon

Details

Once
 

Runs once in the future.

Trigger Enabled: Enables the trigger for use (selected by default).

Trigger On: Date the trigger will run.

At: Time the trigger will run.

Description: (Optional) Description of the trigger.

Interval
 

Runs (and repeats) at a set time interval.

Trigger Enabled: Enables the trigger for use (selected by default).

Every: The interval by day, hour, and minute.

Only run during the following time frame (Optional) Enables a set time frame.

Between: The start of the time frame.

And: The end of the time frame.

Starting: Date the trigger starts.

At: Time the first trigger starts. If the optional time frame is selected, the first trigger will occur at the start of the next time frame.

Ending: (Optional) Date the trigger ends. Leaving this unchecked will allow the trigger to run indefinitely.

At: (Optional) Time the trigger ends.

Description: (Optional) Description of the trigger.

NOTE: Setting the 'Between' time later than the 'And' time will result in the trigger running overnight.

Daily
 

Runs every day at the same time.

Trigger Enabled: Enables the trigger for use (selected by default).

Every Day At:

Time the trigger will run.

Starting: Date the trigger starts.

Ending: (Optional) Date the trigger ends. Leaving this unchecked will allow the trigger to run indefinitely.

Description: (Optional) Description of the trigger.

Weekly
 

Runs every week at the same time on selected days of the week.

Trigger Enabled: Enables the trigger for use (selected by default).

Every Week On:

Day (or days) that the trigger runs.

At: Time the trigger will run.

Starting: Date the trigger starts.

Ending: (Optional) Date the trigger ends. Leaving this unchecked will allow the trigger to run indefinitely.

Description: (Optional) Description of the trigger.

Monthly
 

Runs every month at the same time on selected days.

Trigger Enabled: Enables the trigger for use (selected by default).

Every Month

Day of the Month: The actual day (or days) of the month (for example, 1, 12, 23, etc.). If you select the 29th, 30th, or 31st of the month, the trigger won't run in months without those days. Select Last to always run the trigger on the last day of the month.

Or

Day of the Week: The nth day of the month (for example, First Monday, Second Wednesday, Last, etc.). Different combinations of weeks and days require separate schedules (for example, the 1st Monday and the 2nd Friday). Selecting the 5th week won't run the trigger in a month without a fifth week. Select Last to always run the trigger on the last week of the month.

At: Time the trigger runs.

Starting: Date the trigger starts.

Ending: (Optional) Date that the trigger ends. Leaving this unchecked will allow the trigger to run indefinitely.

Description: (Optional) Description of the trigger.

Scan Age

Runs whenever the age of the last scan on the profile has been exceeded.

Trigger Enabled: Enables the trigger for use (selected by default).

Age: Select the age of the last scan in days, hours, and minutes (minimum time is 30 minutes).

Only At: (Optional) Time the trigger runs.

Description: (Optional) Description of the trigger.

NOTE: This trigger type is only available for Scan Profiles.

Heartbeat

Runs when the computer status changes from Offline to Online. (Requires Enterprise mode.)

Trigger Enabled: Enables the scan trigger for use (selected by default).

Only run during the following time frame (Optional) Enables a set time frame.

Between: The start of the time frame.

And: The end of the time frame.

Starting: Date the trigger starts.

At: Time the first trigger starts. If the optional time frame is selected, the first trigger will occur at the start of the next time frame.

Ending: (Optional) Date the scan ends. Leaving this unchecked will allow the trigger to run indefinitely.

At: (Optional) Time the scan ends.

Description: (Optional) Description of the trigger.

NOTE: This trigger type is only available for Scan Profiles.

NOTE: Setting the 'Between' time later than the 'And' time will result in the trigger running overnight.

Auto Report Status

Depending on how an Auto Report is configured, its icon changes. The table below explains the possible configurations of an Auto Report and its related icons.

Configuration

Icon

Description

Fully Configured

The Auto Report has both a schedule trigger and a report attached and is fully enabled and configured to run automatically. This report is also available to Run Now.

No Schedule Trigger

The Auto Report does not have a schedule trigger, but does have a report attached. This Auto Report is only available to Run Now and will not run automatically.

No Report Attached

The Auto Report has a schedule trigger, but no report is attached.

This report will not run automatically. This report is not available to Run Now.

No Schedule Trigger No Report Attached

The Auto Report has neither a schedule trigger nor a report attached

This report will not run automatically. This report is not available be Run Now.

See also:

Menu and Toolbar Icons

Tree and Page Icons

Computer Window Icons

Basic Report Window Icons

Print Preview Icons

Preferences Window Icons

Miscellaneous Icons

 

 

 

© 2024 PDQ.com Corporation. All rights reserved.

PDQ.com is a trademark of PDQ.com Corporation. All other product and company names are the property of their respective owners.

Help Version: 19.3.538.0