PDQ Inventory comes installed with a predefined set of tools. Some tools are preconfigured to work in your environment out of the box, while other tools must be configured within PDQ Inventory, on target computers, or both before being available for use. This chapter covers the tools available within PDQ Inventory and their configuration. Some tools, such as Remote Desktop and Remote Assistance, may require certain Group Policy settings.
To access these tools, select a computer, click Tools on the main console toolbar (or click the Tools menu) and select the appropriate tool. For details about using tools, see Running a Tool on a Collection or Computer.
This section contains the following topics:
•Tools Descriptions and Configurations
Tools Overview
The following table lists the admin tools available in PDQ Inventory. Some command line equivalent examples below assume ComputerName for the name of a remote computer.
Item |
Icon |
Description |
Event Viewer |
|
Opens the Microsoft Event Viewer and load the target computer. Equivalent to running eventvwr.exe ComputerName on the local computer. |
Manage with MMC |
|
Opens the Microsoft Computer Management Console. Equivalent to running %SYSTEMROOT%\System32\mmc.exe compmgmt.msc /computer:ComputerName on the local computer |
Open ADMIN$ Share |
|
Opens the ADMIN$ share on the remote computer. Equivalent to running explorer.exe "\\ComputerName\ADMIN$"on the computer. |
PDQ Deploy |
|
Opens the Select PDQ Deploy Packages window within PDQ Deploy to initiate a deployment on the selected PDQ Inventory computer(s) or collection(s). |
Reboot/Shutdown |
|
Opens the Reboot/Shutdown window for the selected computer(s) or collection(s). Equivalent to running shutdown /r /t n or shutdown /s /t n on the local computer. |
Remote Assist |
|
Opens the Windows Remote Assistance window. Remote assistance must be enabled on the remote computer. |
Remote Command |
|
Opens the Remote Command window. |
Remote Desktop |
|
Initiates a Remote Desktop session on the remote computer. Equivalent to running %SYSTEMROOT%\system32\mstsc.exe /v:ComputerName:3389 |
VNC |
|
Opens the VNC remote control viewer. (Requires that VNC Viewer is installed on the console machine and that VNC Server is installed and configured on the remote computer) |
Wake |
|
Opens the Wake-On-LAN window for the selected computer(s) or collection(s) and starts sending WOL packets to all machines listed in the window. |
Tools Descriptions and Configurations
Event Viewer
Connects to the remote computer’s Event Viewer in order to view the logged information as though directly connected to the machine. Remote information is shown locally through the PDQ Inventory console’s Event Viewer interface.
Configuration: File and Print Sharing must be enabled on the remote computer.
Manage with MMC
Allows you to manage the remote computer via the Microsoft Management Console (MMC) console. The MMC console allows you to load a number of management snap-ins that can be used to configure and manage a remote computer. The MMC console is loaded locally on the PDQ Inventory console. This particular tool loads the compmgmt.msc snap-in.
Configuration: File and Print Sharing must be enabled on the remote computer.
Open ADMIN$ Share
Opens the ADMIN$ share on the remote computer. This is useful for testing to ensure that File and Printer Sharing is enabled. This is also useful if it is required to access the %SYSTEMROOT% of a remote machine.
Configuration: File and Print Sharing must be enabled on the remote computer.
PDQ Deploy
Opens the Select PDQ Deploy Packages window (and will also start PDQ Deploy if not already started), which allows you to deploy a package to one or multiple computers or to one or multiple collections.
From the Select PDQ Deploy Packages window, select the package or packages (Shift+Click or Ctrl+Click) you wish to deploy, use the > or < to add and remove packages from selected packages list, and click OK to deploy the package. You can also type part of a name of a package in the Type to filter box to limit the choice of packages. If you do not wish to deploy a package, click Cancel.
Configuration: Requires PDQ Deploy on the console computer.
Reboot/Shutdown
Opens the Reboot/Shutdown window. The Reboot/Shutdown tool and corresponding window allows you to reboot or shutdown one or multiple computers or the computers in one or multiple collections. Once the appropriate settings have been made, click OK to initiate the reboot/shutdown or click Cancel to abort the reboot/shutdown.
Item |
Description |
|
Rebooting |
The number of computers being targeted by the Reboot/Shutdown command. |
|
Countdown Timer |
The amount of time from the execution of the tool to the reboot or shutdown of the target computer(s). (Default is 0 seconds). |
|
|
Restart |
Check by default, which will reboot the computer. To shutdown the computer, uncheck the checkbox. |
Message |
A text field that allows you to send a message (using msg.exe) to all targeted computers and their corresponding users notifying them of the reboot/shutdown. Countdown timer must be greater than 0. |
|
Configuration: Security Policy "Force shutdown from a remote system" must be granted to Administrators.
Remote Assist
Opens the Windows Remote Assistance Window. This window allows you to initiate a Remote Assistance session on a single computer.
Configuration: Remote Assistance must be enabled on the target computer (sysdm.cpl > Remote tab or from a GPO).
Remote Command
Opens the Remote Command: [target(s)] window, which allows you to run a remote command on one or multiple computers or to one or multiple collections. Remote commands run remotely on the selected targets.
Item |
Description |
|
Computers |
The number of computers the command will be initiated against. This is not an editable field. |
|
Credentials |
The credentials that will be used for the remote computer(s). The user must be a local administrator on the target computer(s). You can use the default user, the drop-down to select the appropriate user, or click Edit Credentials to add another set of credentials from which to run the command. |
|
Timeout |
The length of time to run the command before aborting the command (default is 180 seconds). |
|
|
Abort |
This button aborts the existing running command on remote target computers where the command has not yet completed running. |
Command |
The command to run on the target computers. This is equivalent to what would be run from the Windows command line. PDQ Inventory saves the command history of each command run against any computers. You can select the drop-down to choose a previously run command. |
|
|
Run |
This button initiates the command on the remote target computers listed in the Computers field and the lower left-hand list of computers. When run, a timer (in seconds) times the running scan. This timer is located below the Abort button. |
Success Codes |
By default, 0 is selected, which means the command was successful. If you need to list other success codes, you can do so as a comma-delimited string. |
|
Computer List box (lower left-hand box) |
The list of the computers the command will be initiated against. This is not an editable field. |
|
Results box (lower right-hand box) |
This is the result of the command. Depending on the command, this will be information directly from the output of the command, a success code, or an error code. This field will not populate until the command has completed. If the command was run against more than one computer, selecting a computer from the Computer List Box (above) will show the result of the command on that computer. |
|
Configuration: The Remote Command tool will accept Windows environmental variables (for example, %PROGRAMFILES%, %WINDIR%, %SYSTEMDRIVE%, etc.).
Remote Desktop
Opens up the Windows Remote Desktop Connection window and initiates a login/login prompt based on either saved credentials or the existing credentials of the PDQ Inventory admin logged into the PDQ Inventory console.
Configuration: RDP ports (TCP & UDP port 3389) must be allowed through Windows firewall and, in certain cases, users will need to be added to the Remote Desktop Users group. For information on configuring the Remote Desktop preferences, please see Remote Control.
VNC
Opens up the remote VNC remote connection on a remote computer.
Configuration: a VNC product (for example, TightVNC) must be installed on both the console and the target machine. Additionally, the viewer file must be installed on the PDQ Inventory machine. If no viewer file is found, PDQ Inventory will open the Remote Control option in Preferences (File > Preferences > Remote Control). For information on configuring the VNC preferences, please see Remote Control.
Wake
Opens the Wake-On-LAN window and immediately initiates a WOL event on all listed machines. WOL can be initiated on a single computer, many computers, a single collection, or multiple collections. Click Cancel to abort the WOL event(s). Click OK once all machines have successfully been started or WOL can no longer run.
NOTE: While Wake-ON-LAN is available in free mode, Pro or Enterprise mode is required for distributed Wake-On-LAN. Distributed WOL is used to initiate WOL events across subnets and VLANs, bypassing border devices that normally block WOL packets.
Item |
Description |
Computer |
List of the computer(s) receiving WOL packets. |
Status |
The status of WOL event (pending, waking, the number of wake attempts, errors, etc.). |
Elapsed |
The total time elapsed from when the WOL event was initiated until stopped. |
Configuration: Wake-on-LAN capability must be enabled in the BIOS/UEFI and Network Interface Card on target computers.
© 2016 Admin Arsenal, Inc. All rights reserved.
Admin Arsenal is a trademark of Admin Arsenal, Inc. All other product and company names are the property of their respective owners.
Help Version: 8.1.0.0